Window Patching Machine Model WPA 1000 DSV
1.This machine has adopted 30mm thickness of main machine side frame that has a good effect for main machine of stability.
2.In safety policies, this machine has been approved CE certificate. Therefore, no matter electric circuit and safe prevention. All of them follow CE specifications to design and manufacture. Those will let operators to get more protection.
3.The whole gluing device can pull the machine out and ease to clean gluing rollers and adjust the gluing stick shape position.
4.The gluing rollers can adjust counter-clockwise, clockwise, left and right direction which let the gluing stick shape position register cardboard easily.
5.The gluing device of delivery section consists of vacuum suction belts. It can ensure the cardboard of stability during delivery.
6.1R / 2R (Cardboard quantity for each cycle) option switch is on the control panel and you can change 1R or 2R by switch. It can save more time when you use it.
7.The film patching wheel treats surface treatment precisely to avoid the scratch of film by friction.
|Model||WPA – 1000 SV||WPA – 1000 DSV|
|Blank length||100mm ~ 710mm||100mm ~ 710mm|
|Blank width||80mm ~ 1000mm||80mm ~ 480mm|
|Film length||38mm ~ 520mm||38mm ~ 520mm|
|Film width||30mm ~ 840mm||30mm ~ 400mm|
|Film thickness||0.03mm~0.20mm ( Straight preparation )|
|Feed Material||Cardboard，E-flute Corrugated Cardboard|
|Length over then 330mm||150 sheets / min||300 sheets / min|
|Length less then 330mm||300 sheets / min||600 sheets / min|
|Specification for power supply|
|Main motor||3.75KW||Glue Wheel Motor||40W|
|High speed blower (A)||3.75KW||Air Compressor||0.75KW|
|High speed blower (B)||1.5KW||Feeder Servo Motor||1.3KW|
|High speed blower (C)||0.75KW||Feeder Servo Motor (DSV)||1.8KW|
|Vibrating Motor||0.05KW||Film Servo Motor||0.9KW|
|Conveyor Motor||0.2KW||Total Power Requirement||12.99KW / 14.79KW|